Filter
Top Products
4 Connecting and Installing Optional Devices
SA200 53
2.
Remove the retaining screws from the memory module
compartment cover on the bottom of the laptop. See
Figure 19.
3.
Remove the memory module compartment cover.
4.
Insert the module into the slot and press with firm, even
pressure until the latches lock it into place. The memory
module is designed to ensure that you insert it in the
correct direction.
5.
Turn your laptop on. The system automatically detects
and gives the following error message: “Warning,
Unexpected Amount of Memory, run SCU.”
6.
Go to BIOS Setup, Save and Reboot.
Figure 19 Memory Module Compartment
Expansion memory modules are easily
damaged by static electricity. You may want to
wear a grounding strap before handling
memory modules. Grounding straps are readily
available at most computer and electronics
shops.
lonestar.boo : sa200.fm Page 53 Friday, March 6, 1998 10:53 AM