Filter
Top Products
5 - 74
6. Click the OK button to dismiss the About CERDisp dialog box on the MX7 Tecton desktop by clicking the OK button in
the HSM Connect window on the PC desktop. The dialog box automatically times out and disappears after
approximately 20 seconds.
7. The MX7 Tecton can now be configured from the HSM Connect window. Input from the PC’s mouse and keyboard are
recognized as if they were attached to the MX7 Tecton.
8. When the remote session is completed, terminate the HSM Connect program by selecting File > Exit or clicking on the
X in the upper right hand corner to close the application, then disconnect the ActiveSync cable.