Filter
Top Products
12 - 1
12
Keymaps
Introduction
Sticky keys are also known as second function keys. Ctl/Ctrl, Alt, Shft, Blue and Orange keys are sticky keys. Sticky keys do not
need to be held down before pressing the next (or desired) key. You can use combined modifiers on specific keys.
The key mapping in this section relates to the physical Keypads (page 3-4). See the Input Panel for the Virtual (or Soft) Keypad
used with the stylus.
55 key Alphanumeric Keymap - Primary Delete
• The following keymap is used on an MX7 Tecton that is NOT running a Terminal
Emulator. Terminal emulators use a separate keymap.
• When using a sequence of keys that includes a sticky key, press the sticky key first,
release it, then press the rest of the key sequence.
• When using a sequence of keys that includes the Orange or Blue keys, press the color
key first then the rest of the key sequence.
• Tapping the Power key when in any sticky mode (Blue, Orange, Shift, etc.) either turns
the device On (when Off) or places it in Suspend (when On).
• Alphabetic keys default to lower case letters. Press the Shft key, then the alphabetic key
for an uppercase letter.
• The diamond 1, F1, F2, F3, F4 and F5 keys can be remapped using the Button panel
(Start > Settings > Personal > Buttons).
• When the computer boots, the default condition of Caps (or CapsLock) is Off. The Caps
(or CapsLock) condition can be toggled with Blue plus Tab key sequence.
To get this Key / Function Press these Keys in this Order
Power / Suspend Power
Field Exit (default VK_PAUSE)
MAP = Mappable
Blue (MAP) Orange (MAP) Shift (MAP) Diamond #1
Volume Adjust Mode Orange Scan Up Arrow / Down Arrow
Volume Adjust Mode Blue V Up Arrow / Down Arrow
Display Backlight Brightness Adjust Mode Blue Scan
Toggle Blue Mode Blue
Toggle Orange Mode Orange
Toggle Shift Mode Shft
Alt Alt
Control Ctl
Esc Blue Alt
Space Spc
Enter Enter
Scan Scan
CapsLock (Toggle) Blue Tab
Back Space Orange Spc