Filter
Top Products
7 - 11
MX7 Tecton with Label
If the MX7 Tecton has a Bluetooth address bar code label attached, follow these steps:
1. Scan the Bluetooth address bar code label, attached to the MX7 Tecton, with the Bluetooth mobile scanner.
2. If this is the first time the Bluetooth mobile scanner has scanned the MX7 Tecton Bluetooth label, the devices are
paired. See Bluetooth Reader Beep and LED Indications (page 7-12). If the devices do not pair successfully, go to the
next step.
3. Open the Bluetooth control panel.
4. Tap Discover. Locate the Bluetooth mobile scanner in the Discovery panel.
5. Double-tap the stylus on the Bluetooth mobile scanner. The right-mouse-click menu appears.
6. Select Pair as Scanner to pair the MX7 Tecton with the Bluetooth mobile scanner.
The devices are paired. The Bluetooth mobile bar code reader responds with a series of beeps and an LED flashes.
Note: After scanning the MX7 Tecton Bluetooth label, if there is no beep and no LED flash from the Bluetooth mobile device,
the devices are currently paired.
MX7 Tecton without Label
If the MX7 Tecton Bluetooth address bar code label does not exist, follow these steps to create a unique Bluetooth address
bar code for the MX7 Tecton:
1. First, locate the MX7 Tecton Bluetooth client MAC Address on the EZPair (or LXEZ Pairing) About panel.
2. Next, create
a Bluetooth address bar code label for the MX7 Tecton. Free bar code creation software is available for
download on the world wide web. Search using the keywords “bar code create”.
3. The format for the bar code label is as follows:
• Bar code type must be Code 128.
• FNC3 character followed by string Uppercase L, lowercase n, lowercase k, uppercase B and then the Bluetooth
address (12 hex digits, no colons). For example, LnkB0400fd002031.
4. Create and print the label.
5. Scan the MX7 Tecton Bluetooth address bar code label with the Bluetooth bar code reader.
The devices are paired. The Bluetooth bar code reader responds with a series of beeps and LED flashes.
Note: After scanning the MX7 Tecton Bluetooth label, if there is no beep and no LED flash from the Bluetooth device, the
devices are currently paired.