Filter
Top Products
14 - 16
RAM Assembly Footprint
Installing the Cradle U-Bracket
Note: Honeywell does not supply the bolts or washers needed when mounting the cradle assembly to the vehicle chassis.
Use bolts with a maximum 10/32” (0.3125) diameter.
1. Attach the U-Bracket to the vehicle, making sure it does not impede safe operation of the vehicle.
2. Attach the Passive Cradle to the U-Bracket using the Angle Adjust knobs.
3. Use both knobs to loosen and tighten the cradle to the U-bracket while determining the best viewing angle. The passive
vehicle mounted cradle is ready for use.
Periodically test the passive mounting device and tighten bolts and/or knob as needed. If the cradle becomes cracked or
warped it must be replaced before the cradle is put back in service.