Filter
Top Products
11 - 27
PEAP/GTC
Note: The date must be properly set on the device to authenticate a certificate.
To use PEAP/GTC, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile.
2. Set EAP Type to PEAP-GTC.
3. Set Encryption to WPA TKIP.
4. Set Auth Type to Open.
5. To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete other
entries as detailed in this section.
6. See Sign-On vs. Stored Credentials (page 11-17) for information on entering credentials.
7. Tap the Credentials button. No entries except the CA Certificate Filename are necessary for Sign-On Credentials as the
user will be prompted for the User Name and Password when connecting to the network.
8. Enter these items as directed below.
9. Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
10. Enter the password.