Filter
Top Products
8 - 5
COM1 does not support 5V switchable power on Pin 9 for tethered scanners.
Notification
Use this panel to toggle internal scanner sounds on and off. Internal scanner sound, by default, is enabled.
Vibration
Enable Good scan vibration or Bad scan vibration when a tactile response on a good scan or bad scan is desired. Scan
sounds are accompanied by a tactile response when the internal scanner Sound parameter is enabled.
Enable short, medium or long duration for each selection (good scan and bad scan).
Adjust the settings and tap ok to save the changes. The changes take effect immediately.
Setting Default
Enable Internal Scanner Sound Enabled
Good Scan Vibration Off
Bad Scan Vibration Off