Filter
Top Products
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
SMS Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
104
0: The short message status is changed to read. (Default)
1: The short message status is not changed.
In case of using the command without <mode>, <mode> is set to 0.
<callerID>: Specifies the number of the short message sender.
<format>: Specifies the encoding format of a short message. The values are as
follows:
0: GSM 7 bit (not supported at present)
1: ASCII encoding (when the encoding range is not greater than 7F)
2: IA5 (not supported at present)
3: octet (not supported at present)
4: Latin (not supported at present)
5: Latin_Hebrew (not supported at present)
6: UNICODE encoding (when the encoding range is greater than 7F)
<year, month, day, hour, minute,second>: The year, month, day, hour, minute, and
second when a short message is received.
<Length>: Specifies the length of a received short message.
<lang>: Specifies the language. The values are as follows:
0: unspecified
1: English
6: Chinese
<prt>: Specifies the priority of a short message. The values are as follows:
0: normal
1: interactive
2: urgent
3: emergency
<Prv>: Specifies the confidentiality level. The values are as follows:
0: normal
1: restricted
2: confidential
3: secret
<type>: Specifies the type of a short message. The values are as follows:
0: normal