Filter
Top Products
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
SMS Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
107
Command
Possible Response(s)
+CMGF?
<CR><LF>+CMGF:<mode><CR><LF>
<CR><LF>OK<CR><LF>
+CMGF=?
<CR><LF>+CMGF:(list of supported
<mode>s)<CR><LF>
<CR><LF>OK<CR><LF>
8.17.2 Interface Description
The SET command is used to set the format of the short message. The format has
two modes, and depends on the <mode> parameter. The two modes are: PDU mode
and TEXT mode. The TEXT mode is unable to display Chinese. The format of
message in PDU mode, refers to ^HCMGS command.
The READ command is used to return the current mode selection.
The TEST command returns the applicable <mode> values.
8.17.3 Parameter Description
<mode>:
0 PDU mode
1 TEXT mode (Default)
If no <mode> is included, it is equivalent to the effect that the <mode> is 1.