Huawei MC509 Network Router User Manual


 
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
Network Service Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
69
6.15 ^OTAACTEDCommand for Querying the OTA
Activation Status
6.15.1 Syntax
Command
Possible Response(s)
^OTAACTED?
<CR><LF>^OTAACTED:<value><CR><LF>
<CR><LF>OK<CR><LF>
6.15.2 Interface Description
This command queries whether the over-the-air (OTA) interface is activated. The
initial value of <value> is 0. If the MT is activated through the OTA interface, the
value is 1.
6.15.3 Parameter Description
<value>: Specifies the OTA status.
0: not activated
1: activated
6.16 ^OTACMSGCommand for Indicating the OTA
Update Status
6.16.1 Syntax
Command
Possible Response(s)
<CR><LF>^OTACMSG:<status><CR><LF>
6.16.2 Interface Description
This command reports the OTA update status.
6.16.3 Parameter Description
<status>: Indicates the OTA update status.
0: initialized
1: Over-the-air service provisioning (OTASP) programming started
2: Service Programming Lock unlocked