Filter
Top Products
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
SMS Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
106
0: The short messages specified by <index> are deleted. The execution result
corresponds to the execution result without the parameter.
1: All read short messages on the preferred storage medium are deleted; unread,
sent, and unsent short messages are retained.
2: All read and sent short messages on the preferred storage medium are deleted;
unread and unsent short messages are retained.
3: All read, sent, and unsent short messages on the preferred storage medium are
deleted; unread short messages are retained.
4: All short messages (including unread short messages) on the preferred storage
medium are deleted.
8.16 ^SMMEMFULL–Command for Reporting Full of
Short Messages on a Storage Medium
8.16.1 Syntax
Command
Possible Response(s)
<CR><LF>^SMMEMFULL:<mem_type><CR><LF>
8.16.2 Interface Description
If the limit for the short messages stored on the specified storage medium has been
reached, this event is automatically reported to the TE by using the ^SMMEMFULL
command when a new message arrives. The user can use the +CPMS command to
switch to another storage medium for storing the message.
8.16.3 Parameter Description
<mem_type>: A string, specifying the type of the storage medium where short
messages are full.
"SM": R-UIM card
"ME": nonvolatile memory on the module
8.17 +CMGF– Command for Set Message Format
8.17.1 Syntax
Command
Possible Response(s)
+CMGF[=<mode>]
<CR><LF>OK<CR><LF>