Filter
Top Products
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
SMS Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
85
All storage medium types supported by the MT can be returned when the test
command is executed.
8.1.3 Parameter Description
<mem1>: Specifies the medium for short message read and deletion. It is a string
with double quotation marks. The optional values are as follows:
"SM": R-UIM card
"ME": nonvolatile memory on the module (default value after startup)
<mem2>: Specifies the medium for short message write and sending. It is a string
with double quotation marks. Its optional values and default value are the same as
those of <mem1>.
<mem3>: Specifies the medium for storing the received short message. It is a
string with double quotation marks. Its optional values and default value are the same
as those of <mem1>.
<total1>: An integer, specifying the total number of short messages that can be saved
in <mem1>.
<total2>: An integer, specifying the total number of short messages that can be saved
in <mem2>.
<total3>: An integer, specifying the total number of short messages that can be saved
in <mem3>.
<used1>: An integer, specifying the number of short messages that are saved in
<mem1>.
<used2>: An integer, specifying the number of short messages that are saved in
<mem2>
<used3>: An integer, specifying the number of short messages that are saved in
<mem3>.
8.2 +CNMI–Command for Setting the Mode of New
Short Message Notification
8.2.1 Syntax
Command
Possible Response(s)
+CNMI[=<mode>[,<mt>
[,<bm>[,<ds>[,<bfr>]]]]]
<CR><LF>OK<CR><LF>
In case of an SMS-related error:
<CR><LF>+CMS ERROR:<err><CR><LF>
+CNMI?
<CR><LF>+CNMI:<mode>,<mt>,<bm>,<ds>,<bfr><CR>
<LF>
<CR><LF>OK<CR><LF>