Huawei MC509 Network Router User Manual


 
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
Audio Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
125
2 long sync offset set: the long sync sent to the external world in Aux PCM master
mode is launched 1/4 cycle ahead of the rising edge of PCM CLK (Reserved,
not supported currently)
11.3 +CMIC -Tune microphone gain level
11.3.1 Command Syntax
Command
Possible response(s)
+CMIC=<level>
<CR><LF>OK<CR><LF>
<CR><LF>+CME ERROR: <err><CR><LF>
+CMIC?
<CR><LF>+CMIC: <level>
<CR><LF><CR><LF>OK<CR><LF>
<CR><LF>+CME ERROR: <err><CR><LF>
+CMIC=?
<CR><LF>+CMIC: (list of supported <level>s)
<CR><LF><CR><LF>OK<CR><LF>
<CR><LF>+CME ERROR: <err><CR><LF>
11.3.2 Description
This command is used to adjust the microphone gain of the MT.
Test command returns supported values as compound value.
11.3.3 Defined values
<level>: 1~12 integer type value with manufacturer specific range (smallest value
represents the lowest gain). Default value is 5. Resetting the module will not affect
the value. Firmware updating will reset the value to default value.
11.4 +CLVL -Tune loudspeaker volume level
11.4.1 Command Syntax
Command
Possible response(s)
+CLVL=<level>
<CR><LF>OK<CR><LF>
<CR><LF>+CME ERROR: <err><CR><LF>
+CLVL?
<CR><LF>+CLVL:
<level><CR><LF><CR><LF>OK<CR><LF>
<CR><LF>+CME ERROR: <err><CR><LF>