HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
SAR Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
132
13.2 ^BODYSARCDMA –Set the max tx Power Limit of
CDMA
13.2.1 Syntax
Command
Possible Response(s)
^BODYSARCDMA=<
power>
In case of successful execution:
<CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
^BODYSARCDMA?
I In case of successful execution:
<CR><LF>^BODYSARCDMA:<power><CR><LF>
<CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
^BODYSARCDMA=?
<CR><LF>^BODYSARCDMA:(19,24)<CR><LF>
<CR><LF>OK<CR><LF>
13.2.2 Interface Description
This command is used to set the max transmit power limit of CDMA. Read command
can queries current value of the max transmit power limit, Test command returns
supported value of the max transmit power limit.
13.2.3 Parameter Description
< power>: the max transmit power limit of CDMA
Integer from 19 to 24; default value is 24
13.3 ^THERM–Thermal Protection Activated Usolicited
Report
13.3.1 Syntax
Command
Possible Response(s)
<CR><LF>^THERM:<Status><CR><LF>