Filter
Top Products
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
Network Service Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
62
6.5.2 Interface Description
This command
forced to set priorities network mode for the user
.
6.5.3 Parameter Description
< pref_mode >:
2: CDMA mode
4: HDR mode
8: CDMA/HDR HYBRID mode
6.6 ^rfswitch–Command for Setting the Flight Mode
6.6.1 Syntax
Command
Possible Response(s)
^RFSWITCH [=<SW state>]
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
^ RFSWITCH?
<CR><LF>^ RFSWITCH:<SW state>,<HW
state><CR><LF><CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
^ RFSWITCH =?
<CR><LF>^ RFSWITCH: (0-1),(0-1)
<CR><LF><CR><LF>OK<CR><LF>
6.6.2 Interface Description
This command switches the RF and save the corresponding value, the query
features include pin LGA interface PIN45 status query, LGA interface PIN45 pin
determines the state of the state of the hardware switch. Background according to
the return value of the order to determine the background screen when in operation,
whether to pop-up message.
^ RFSWITCH feature is equivalent to + CFUN function (the two values 0 and 1),
based on the values save the corresponding value.
AT^RFSWITCH=0 equivalent to AT+CFUN=0
AT^RFSWITCH=1 equivalent to AT+CFUN=1