HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
Basic Configuration Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34
If the AT+CFUN command is executed without parameters, the operating mode is set to the
LPM mode.
2.12 ^VOLT–Command for Querying the voltage
2.12.1 Syntax
Command
Possible Response(s)
^VOLT
<CR><LF>^VOLT:<voltage><CR><LF><CR><LF>
OK<CR><LF>
In case of an MT-related error:
<CR><LF>ERROR<CR><LF>
2.12.2 Interface Description
This command queries the current voltage.
2.12.3 Parameter Description
<voltage>: Units of mV
2.13 ^RESET - Command for Delaying the Module Reset
Function
2.13.1 Syntax
Command
Possible Response(s)
^RESET[=<delay_time>]
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>+CME ERROR:<err><CR><LF>
^RESET?
In case of successful execution:
<CR><LF>^RESET:<delay_time><CR><LF>
<CR><LF>OK<CR><LF>
2.13.2 Interface Description
This command restarts the MT.