Filter
Top Products
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
SMS Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
88
^HCDS: [<reserved>],<length><CR><LF> <layer3 packet><CR><LF>
If Text mode enabled:
^HCDS:
<callerID>,<year>,<month>,<day>,<hour>,<minute>,<second>,<lang>,<format>,<len
gth>,<prt>,<prv>,<type>,<tag><CR><LF><msg><ctrl-z><CR><LF>
2: The short message return receipt is stored in the MT, and a storage position
notification is sent to the TE by using the +CDSI command. (default value after
startup).
+CDSI：<mem>,<index><CR><LF>
<bfr>: Set the buffer processing when <mode>=1, 2 is entered from <mode>=0.
0: In the <mode>1-2 mode, MS sends all URCs to TE in one time. (default value after
startup)
1: In the <mode>1-2 mode, clear all URCs..
8.2.4 Example
Set CNMI=1,1,0,1,0.
A new short message is stored in the MT, and the storage position is reported by
running the +CMTI:"ME",1 command. A status report short message is not stored but
is reported by using the ^HCDS command.
If a message notification cannot be reported (for example, in the online-data mode),
the message notification is discarded.
8.3 +CMTI–Command for Indicating the Arrival of a
Short Message
8.3.1 Syntax
Command
Possible Response(s)
<CR><LF>+CMTI:<mem>,<index><CR><LF>
8.3.2 Interface Description
This command indicates that a new short message or a new status report short
message has been received.
8.3.3 Parameter Description
<mem>: Specifies the storage medium of a short message. Currently, only "SM" and
"ME" are supported.
"ME": ME short message storage medium