Huawei MC509 Network Router User Manual


 
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
Call Control Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
78
7.11 +CLIPCommand for Setting the Presentation of
Caller ID
7.11.1 Syntax
Command
Possible Response(s)
+CLIP[=<n>]
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>+CME ERROR:<err><CR><LF>
+CLIP?
<CR><LF>+CLIP:<n><CR><LF>
<CR><LF>OK<CR><LF>
+CLIP=?
<CR><LF>+CLIP:(supported <n> list)<CR><LF>
<CR><LF>OK<CR><LF>
URC
<CR><LF>+CLIP:<number>,<type>,,,,<CLI
validity><CR><LF>
7.11.2 Interface Description
The set command sets whether reporting of the caller ID unsolicited result code
(URC) is allowed. If the caller ID URC is allowed to be reported, when there is an
incoming call, the caller ID indication is provided following the RING indication and
periodically (every five seconds) reported to the TE.
7.11.3 Parameter Description
<n>:
0: Caller ID URC reporting is not allowed (default value after startup).
1: Caller ID URC reporting is allowed.
In case of using the command without <n>, <n> is set to 0.
<number>: Specifies a calling number. It is a string with double quotation marks.
Allowed characters include only 09, *, #, and +.
<type>: Specifies the number type. "145" indicates an international number, and
"129" indicates a national number. For details, see section 15.5 "Phone Number
Type."
<CLI validity>:
0: The call line identity (CLI) is valid.
1: The CLI is rejected by the call originator.