Filter
Top Products
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
Phonebook Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
108
9 Phonebook Interface Commands
9.1 +CPBS–Command for Selecting a Phonebook
Memory
9.1.1 Syntax
Command
Possible Response(s)
+CPBS=<storage>
[,<reserved>]
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>+CME ERROR:<err><CR><LF>
+CPBS?
<CR><LF>+CPBS:<storage>,<used>,<total><CR><LF>
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>+CME ERROR:<err><CR><LF>
+CPBS=?
<CR><LF>+CPBS:(supported <storage> list)<CR><LF>
<CR><LF>OK<CR><LF>
9.1.2 Interface Description
The set command selects a phonebook memory. The initial setting is "SM" after the
MT is restarted. Other phonebook-related commands are executed on the
phonebook memory selected by this command.
The currently selected phonebook memory, number of used entries, and maximum
number of entries are returned when the read command is executed.
The supported phonebook memory type is returned when the test command is
executed.
9.1.3 Parameter Description
<storage>: Specifies the type of the phonebook memory.