Filter
Top Products
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
Appendix
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
153
Type-of-Number(bit6…bit4): The values are as follows:
0 0 0: This value is selected when the subscriber does not know the check
information of the target address number. The address number is organized by the
network side.
0 0 1: This value is selected when the subscriber can identity that the number is an
international number or the user considers that the number is in the national number
range.
0 1 0: The number is a national number without a prefix or a suffix. This value is
selected when the subscriber originates a national call.
0 1 1: The number is a specific number on the network and is used for management
or service. This value cannot be used by the user.
1 0 1: The number is in the default 7-bit encoding format of the GSM and is not
supported at present.
1 1 0: The number is short and is not supported at present.
1 1 1: The number is reserved for extension and is not supported at present.
Numbering-plan-identification(bit3…bit0): The values are as follows:
(Note: bit3…bit0 is valid only when the value of bit6…bit4 is 000,001,010.
0 0 0 0: The number depends on the number scheme on the network side.
0 0 0 1: ISDN/telephone numbering plan
0 0 1 1: data numbering plan, not supported at present.
0 1 0 0: telex numbering plan, not supported at present.
1 0 0 0: national numbering plan, not supported at present.
1 0 0 1: private numbering plan, not supported at present.
1 0 1 0: ERMES numbering plan, not supported at present.
The common phone number types are as follows:
145: international number
129: national number
161: national number without a prefix or a suffix