Filter
Top Products
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
Basic Configuration Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
25
2 Basic Configuration Commands
2.1 E–Echo Command
2.1.1 Syntax
Command
Possible Response(s)
E[<value>]
<CR><LF>OK<CR><LF>
2.1.2 Interface Description
This command sets whether the MT echoes the characters received from the TE.
The dial-up network, especially the automatic processing software automatically sends the
ATE0 command to disable the echo mode, thus shortening the time for the client to parse the
AT command.
2.1.3 Parameter Description
<value>:
0: The MT does not echo the characters received from the TE.
1: The MT echoes the characters received from the TE (default value after startup).
In case of using the command without <value>, <value> is set to 1.
After restart, <value> is set to 1.