Filter
Top Products
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
Network Service Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
61
6.4 ^MODE–Command for Indicating the System Mode
Change
6.4.1 Syntax
Command
Possible Response(s)
<CR><LF>^MODE:<sys_mode>[,<sys_submode>]
<CR><LF>
6.4.2 Interface Description
When the system mode changes, the MT automatically reports the change to the TE.
6.4.3 Parameter Description
<sys_mode>: Indicates the system mode. The values are as follows:
0: no service
2: CDMA mode
4:HDR mode
6:GPS mode
8:CDMA/HDR HYBRID
<sys_submode>: Indicates the system sub-mode. This parameter is not used in the
product.
6.5 ^PREFMODE–Command for setting the network
mode
6.5.1 Syntax
Command
Possible Response(s)
^PREFMODE=<pref_mode
>
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>ERROR<CR><LF>
^PREFMODE?
<CR><LF>^PREFMODE:<pref_mode><CR><LF>
<CR><LF>OK<CR><LF>
^PREFMODE=?
<CR><LF>^ PREFMODE: (range of supported <
pref_mode >s)<CR><LF>OK<CR><LF>