Filter
Top Products
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
SMS Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
91
8.5.2 Interface Description
This command indicates that a new status report short message is received and
provides the storage position.
8.5.3 Parameter Description
<mem>: Specifies the storage location of a short message.
"SM": R-UIM short message storage medium
"ME": ROMSIM short message storage medium
<index>: An integer, identifying the position in the storage location.
8.6 ^HCDS–Command for Reporting a New Status
Report Short Message
8.6.1 Syntax
Command
Possible Response(s)
If PDU mode enabled：
<CR><LF>^HCDS: [<reserved>],<length><CR><LF> <layer3
packet><CR><LF>
If text mode enabled：
<CR><LF>^HCDS:
<callerID>,<year>,<month>,<day>,<hour>,<minute>,<second>,
<lang>,<format>,<length>,<prt>,<prv>,<type>,<tag><CR><LF>
<msg><ctrl-z><CR><LF>
8.6.2 Interface Description
This command reports a received new short message report without storing it to the
TE.
8.6.3 Parameter Description
<callerID>: Specifies the number of the short message sender.
<format>: Specifies the encoding format of a short message. The values are as
follows:
0: GSM 7 bit (not supported at present)
1: ASCII encoding (when the encoding range is not greater than 7F)
2: IA5 (not supported at present)
3: octet (not supported at present)