Filter
Top Products
HPSS Installation Guide September 2002 215
Release 4.5, Revision 2
Chapter 5 HPSS Infrastructure
Configuration
5.1 Overview
This chapter provides instructions and supporting information for the infrastructure configuration
of HPSS.
Before configuring the HPSS infrastructure, we recommend that the administrator be familiar with
UNIX commandsand configuration, be familiar with a UNIX text editor, and have some experience
with the C language, shell scripts, DCE, and Encina.
The procedures described in this chapter assume that DCE, Encina, Sammi, Java, and HPSS have
been successfully installed. In addition, a DCE/DFS cell has been fully configured.
5.1.1 Infrastructure Road Map
The steps required to configure the HPSS infrastructure are listed below. Each step is discussed in
more detail in the section referenced.
1. Verify the prerequisite software (Section 5.2 below).
2. Define the HPSS environment variables (Section 5.3: Define the HPSS Environment Variables
on page 216).
3. Configure the HPSS infrastructure on a node (Section 5.4: Configure the HPSS Infrastructure
on a Node on page 240).
5.2 Verify the Prerequisite Software
Verify that the appropriate versions of the following prerequisites have been installed and
configured in preparation for the HPSS infrastructure configuration (For versions, see Section 2.3:
Prerequisite Software Considerations on page 46):
• DCE/DFS