Filter
Top Products
Appendix E Infrastructure Configuration Example
HPSS Installation Guide September 2002 519
Release 4.5, Revision 2
New file bfmigrrec.1 created
...
oot SFS server: /.:/encina/sfs/hpss
All SFS servers:
/.:/encina/sfs/hpss
Currently selected SFS server: /.:/encina/sfs/hpss
Currently selected data volume: dataVol
Filename extension: <none>
1) Create a file (on current SFS)
2) Create all global files (on root SFS)
3) Create all files for a storage subsystem (on current SFS)
4) Empty a file (on current SFS)
5) Destroy a file (on current SFS)
6) Query a file (on current SFS)
7) List files on current SFS
8) List files on all SFS servers
9) Select root SFS server
10) Select current SFS server
11) Add an SFS to work with
12) Remove an SFS from the list
13) Select current data volume
14) Change filename extension
Select operation (<RETURN> to exit):
<mkhpss> Infrastructure Configuration Menu
=================================
<mkhpss> Prompt ==> Select Infrastructure Configuration Option:
<mkhpss> [1] Configure HPSS with DCE
<mkhpss> [2] Configure SFS Server
<mkhpss> [3] Create and Manage SFS Files
<mkhpss> [4] Set Up FTP Daemon
<mkhpss> [5] Set Up Startup Daemon
<mkhpss> [6] Add SSM Administrative User
<mkhpss> [7] Start SSM Servers/User Session
<mkhpss> [E] Re-run hpss_env()
<mkhpss> [U] Un-configure HPSS
<mkhpss> [X] Exit
<mkhpss> Reply ===> (Select Option [1-7, E, U, X]):4
<mkhpss> Perform FTP Daemon Setup
========================
<mkhpss> Verify User ID
==============
<mkhpss> Status ==> User root; verified; continue...
<hpss_ftpd_config> Status => Perform HPSS FTP Daemon setup
<hpss_ftpd_config> Prompt => Do you wish to use the default port IDs? (control port = 4021;