Filter
Top Products
Appendix E Infrastructure Configuration Example
HPSS Installation Guide September 2002 507
Release 4.5, Revision 2
=================================
<mkhpss> Prompt ==> Select Infrastructure Configuration Option:
<mkhpss> [1] Configure HPSS with DCE
<mkhpss> [2] Configure SFS Server
<mkhpss> [3] Create and Manage SFS Files
<mkhpss> [4] Set Up FTP Daemon
<mkhpss> [5] Set Up Startup Daemon
<mkhpss> [6] Add SSM Administrative User
<mkhpss> [7] Start SSM Servers/User Session
<mkhpss> [E] Re-run hpss_env()
<mkhpss> [U] Un-configure HPSS
<mkhpss> [X] Exit
<mkhpss> Reply ===> (Select Option [1-7, E, U, X]): 4
<mkhpss> Perform FTP Daemon Setup
========================
<mkhpss> Verify User ID
==============
<mkhpss> Status ==> User root; verified; continue...
<hpss_ftpd_config> Status => Perform HPSS FTP Daemon setup
<hpss_ftpd_config> Prompt => Do you wish to use the default port IDs? (control port = 4021;
data port = 4020) (y/n)(y)
<mkhpss> Status ==> FTP Daemon setup completed, continue...
<mkhpss> Infrastructure Configuration Menu
=================================
<mkhpss> Prompt ==> Select Infrastructure Configuration Option:
<mkhpss> [1] Configure HPSS with DCE
<mkhpss> [2] Configure SFS Server
<mkhpss> [3] Create and Manage SFS Files
<mkhpss> [4] Set Up FTP Daemon
<mkhpss> [5] Set Up Startup Daemon
<mkhpss> [6] Add SSM Administrative User
<mkhpss> [7] Start SSM Servers/User Session
<mkhpss> [E] Re-run hpss_env()
<mkhpss> [U] Un-configure HPSS
<mkhpss> [X] Exit
<mkhpss> Reply ===> (Select Option [1-7, E, U, X]): 5
<mkhpss> Verify User ID
==============
<mkhpss> Status ==> User root; verified; continue...