IBM Hub/Switch Switch User Manual


 
Chapter 6 HPSS Configuration
382 September 2002 HPSS Installation Guide
Release 4.5, Revision 2
Same Job On Controller The number of cartridges
from this job mounted on
this drive’s controller. The
larger the number, the
harder the PVR will try to
avoid mounting two tapes
in the same stripe set on
drives attached to the same
controller. See Advice
below for more
information.
Any positive 32-bit integer value. 10
Other Job On Controller The number of cartridges
from other jobs mounted
on this drive’s controller.
The larger the number, the
harder the PVR will try to
avoid mounting any two
tapes on drives attached to
the same controller. See
Advice below for more
information.
Any positive 32-bit integer value. 5
Distance to Drive The number of units of
distance from the cartridge
to the drive. The larger the
number, the harder the
PVR will try to mount
tapes on the closest drive
to the tape’s current
location. See Advice
below for more
information.
Any positive 32-bit integer value. 3495 - 2
3494 - 2
3584 - 0
STK - 20
RAIT - 0
Operator - 0
Table 6-31 Physical Volume Repository Configuration Variables (Continued)
Display Field Name Description Acceptable Values
Default
Value