Filter
Top Products
Chapter 6 HPSS Configuration
HPSS Installation Guide September 2002 345
Release 4.5, Revision 2
6.8.8 Mover Specific Configuration
The Mover (MVR) specific configuration entry can be created using the Mover Configuration
window. After the configuration entry is created, it can be viewed, updated, or deleted through the
same window.
From the HPSS Health and Status window (shown in Figure 6-1), click on the Admin menu, select
the Configure HPSS option and click on the Servers option. The HPSS Servers window will be
displayed as shown in Figure 6-5.
To add a new specific configuration, select the Mover entry and click on the Type-specific... button
from the Configuration button group on the HPSS Servers window. The Mover Configuration
window will be displayed as shown in Figure 6-27 with default values. If the default data is not
desired, change the fields with the desired values. Click on the Add button to create the
configuration entry.
To update an existing configuration, select the Mover entry on the HPSS Servers window and click
on the Type-specific... button from the Configuration button group. The Mover Configuration
window will be displayed with the configured data. After modifying the configuration, click on the
Update button to write the changes to the appropriate SFS file.
To delete an existing configuration, select the Mover entry on the HPSS Servers window and click
on the Type-specific... button from the Configuration button group. The Mover Configuration
window will be displayed withthe configured data. Clickon the Deletebutton to delete the specific
configuration entry.
Refer to the window’s help file for more information on the individual fields and buttons as well as
the supported operations available from the window.