Filter
Top Products
Chapter 6 HPSS Configuration
324 September 2002 HPSS Installation Guide
Release 4.5, Revision 2
• Mover
• Name Server
• NFS Daemon
• Non-DCE Client Gateway
• Physical Volume Library
• Physical Volume Repository
• Storage Server
Sections 6.8.1 through 6.8.14 describe the specific configuration for each of the above servers.
The SSM servers, Location Servers, NFS Mount Daemons, and Startup Daemons do not have
specific configurations.
6.8.1 Bitfile Server Specific Configuration
The Bitfile Server specific configuration entry can be created using the Bitfile Server Configuration
window. After the configuration entry is created, it can be viewed, updated, or deleted through the
same window.
From the HPSS Health and Status window (shown in Figure 6-1), click on the Admin menu, select
the Configure HPSS option and click on the Servers option. The HPSS Servers window will be
displayed as shown in Figure 6-5.
To add a new specific configuration, select the Bitfile Server entry and click on the Type-specific...
button from the Configuration button group on the HPSS Servers window. The Bitfile Server
Configuration window will be displayed as shown in Figure 6-20 with default values. If the default
data is not desired, change the fields with the desired values. Click on the Add button to create the
configuration entry.
To update an existing configuration, select the Bitfile Server entry on the HPSS Servers window and
click on the Type-specific... button from the Configuration button group. The Bitfile Server
Configuration window will be displayed with the configured data. After modifying the
configuration, click on the Update button to write the changes to the appropriate SFS file.
To delete an existing configuration, select the Bitfile Server entry on the HPSS Servers window and
click on the Type-specific... button from the Configuration button group. The Bitfile Server
Configuration window will be displayed with the configured data. Click on the Delete button to
delete the specific configuration entry.
Refer to the window’s help file for more information on the individual fields and buttons as well as
the supported operations available from the window.