Filter
Top Products
Appendix E Infrastructure Configuration Example
HPSS Installation Guide September 2002 499
Release 4.5, Revision 2
Check the network and DCE on both sides
Found: 1 Trusted Cell Members
TrustedCells[0].cell_id = b0e840f4-2206-11d5-9453-0004ac498ce4
TrustedCells[0].uid = 101
TrustedCells[0].cell_name = /.../host_cell.clearlake.ibm.com
TrustedCells[0].hpss_cell_id = 200090
/.../host_cell.clearlake.ibm.com successfully opened
Completed Cross Cell Trust Check
<mkhpss> Status ==> Configure HPSS with DCE completed, continue...
<mkhpss> Infrastructure Configuration Menu
=================================
<mkhpss> Prompt ==> Select Infrastructure Configuration Option:
<mkhpss> [1] Configure HPSS with DCE
<mkhpss> [2] Configure SFS Server
<mkhpss> [3] Create and Manage SFS Files
<mkhpss> [4] Set Up FTP Daemon
<mkhpss> [5] Set Up Startup Daemon
<mkhpss> [6] Add SSM Administrative User
<mkhpss> [7] Start SSM Servers/User Session
<mkhpss> [E] Re-run hpss_env()
<mkhpss> [U] Un-configure HPSS
<mkhpss> [X] Exit
<mkhpss> Reply ===> (Select Option [1-7, E, U, X]): 2
<mkhpss> Perform Encina Register
=======================
<mkhpss> Prompt ==> HPSS Environment Table to use (/opt/hpss/config/hpss_env):
<mkhpss> Prompt ==> HPSS SFS Name to use (/.:/encina/sfs/hpss):
<mkhpss> Status ==> Creating local encina directories ...
<mkhpss> Status ==> Creating mirror encina directories ...
<mkhpss> Prompt ==> Password for cell_admin:
<mkhpss> Status ==> Creating group encina_admin_group ...
<mkhpss> Status ==> Creating group encina_servers_group ...
<mkhpss> Status ==> Creating principal encina_admin ...
<mkhpss> Status ==> Creating principal encina/sfs/hpss ...