Filter
Top Products
Chapter 6 HPSS Configuration
HPSS Installation Guide September 2002 369
Release 4.5, Revision 2
Server ID The UUID of the Non-
DCE Client Gateway. This
ID is copied over from the
Non-DCE Client Gateway
general configuration
entry.
The UUID of the Non-DCE Client
Gateway. This field cannot be
modified. It is displayed for
reference only.
Assigned by
SSM when
the Non-DCE
Client
Gateway
general
configuration
entry is
created.
TCP Port Default port number to be
used by the Non-DCE
Client Gateway’s listener
process.
This number must be unique among
all Non-DCE Client Gateways
running on a single host
8001
Maximum Processes The maximum number of
request processes that can
be active at any point in
time. Effectively the
maximum number of
clients that can be
connected to theNon-DCE
Client Gateway at a time.
Any positive 32-bit integer value. 50
Thread Pool Size The size of the request
thread pool for each
request process. If the
number of simultaneous
requests equals this
number, the thread pool
will be expanded up to its
maximum defined value to
handle additional requests.
When request activity is
then reduced, the size of
the thread pool with be
reduced back to this value.
Any positive 32-bit integer value. 10
Maximum Thread Pool Size The maximum number of
request threads per process
active at any one time. If
the number of
simultaneous requests
equals this number, any
additional requests will be
queued for processing by
the next available request
thread.
Any positive 32-bit integer value.
This value must be at least as large
as the value given for Thread Pool
Size.
50
Table 6-29 Non-DCE Client Gateway Configuration Variables
Display Field Name Description Acceptable Values
Default
Value