Filter
Top Products
Chapter 6 HPSS Configuration
398 September 2002 HPSS Installation Guide
Release 4.5, Revision 2
Server ID The UUID of this SS. This
ID is copied from the SS
general configuration
entry.
This field cannot be modified. It is
displayed for reference only.
Extracted
from the SS
general server
configuration
entry.
Statistics Fields. The following fields are displayed for Tape Storage Servers only.
Total Virtual Volumes The number of virtual
volumes that are managed
by this SS. This field is
applicable to the Tape
Storage Server only.
Any positive 64-bit integer value. 0
Advice: This value should be set tozero whenthe specific configuration record is first
created. The SS will calculate and update the configuration file as virtual volumes
are added and deleted from the system. This value should only be changed when the
SS is not running. See the documentation on the utility program “settapestats”
for information about updating this value in established servers.
Total Allocated Volumes The number of virtual
volumes that are either
available for space
allocation or full. This is
the number of virtual
volumes known to the
server that are not in a
“scratch” state. This field
is applicable to the Tape
Storage Server only.
Any positive 64-bit integer value. 0
Advice: This value should be set tozero whenthe specific configuration record is first
created. The SS will calculate and update the configuration file as virtual volumes
are added and deleted from the system, and as volume states change. This value
should only be changed when the SS is not running. See the documentation on the
utility program “settapestats” for information about updating this value in
established servers.
Table 6-32 Storage Server Configuration Variables (Continued)
Display Field Name Description Acceptable Values
Default
Value