Filter
Top Products
Appendix E Infrastructure Configuration Example
498 September 2002 HPSS Installation Guide
Release 4.5, Revision 2
<mkhpss> [E] Re-run hpss_env()
<mkhpss> [U] Un-configure HPSS
<mkhpss> [X] Exit
<mkhpss> Reply ===> (Select Option [1-7, E, U, X]): 1
<mkhpss> Perform DCE Set up
==================
<mkhpss> Verify DCE is Running
=====================
<mkhpss> Status ==> DCE is running, continue...
<mkhpss> Perform DCE Register
<hpss_dce_register> Status => Running /opt/hpss/config/hpss_dce_register on host.clear-
lake.ibm.com by root on Fri Aug 10 11:41:51 CDT 2001
<hpss_dce_register> Prompt => Password for cell_admin:
<hpss_dce_register> Status => Create the groups, principals and accounts
<hpss_dce_register> Status => Create HPSS Server CDS directories
<hpss_dce_register> Status => Create server, client keytabs files
<hpss_dce_register> Status => Set permisiions on keytab files
<mkhpss> Perform Set up and Check Cell
============================
<hpss_setup_and_check_cell> Prompt => Password for cell_admin:
<hpss_setup_and_check_cell> Status => Found 1 Cell entries:
/.../host_cell.clearlake.ibm.com/krbtgt/host_cell.clearlake.ibm.com
<hpss_setup_and_check_cell> Status => Local Cell is /.../host_cell.clearlake.ibm.com
<hpss_setup_and_check_cell> Status => All HPSS ERAs created (or already existed).
<hpss_setup_and_check_cell> Status => Be sure to populate the HPSS.homedir and hpss.gecos
for all customers.
This application tries to contact every cell in the
“hpss_cross_cell_members” group.
This test will indicate failures in the HPSS configuration
including:
A). The hpss_cross_cell_members group does NOT exist.
B) A krbtgt/... member in the “hpss_cross_cell_members”
group has no CellId ERA
Examine the output to be sure every cell that is expected to be a
Trusted Cross Cell appears in the output.
If the application stops prior to the completion message,
a cell is probably unreachable!