PCI/Plug and Play SetupCBI/CGI Technical Reference
Chassis Plans. 7-1
Chapter 7 PCI/Plug and Play Setup
PCI/PLUG AND
P
LAY SETUP
When you select PCI/Plug and Play Setup from the AMIBIOS Setup Utility Main
Menu, the following Setup screen displays:
PCI/Plug and Play Setup Screen
When you display the PCI/Plug and Play Setup screen, the format is similar to the
sample shown above, except the screen displays only twenty options at a time. If you
need to change other options, use the down arrow key to locate the appropriate option.
The available values for each option are displayed on the right side of the screen when
you tab or arrow into the field.
_______________________________________________________________________
NOTE: The values on this screen do not necessarily reflect the values appropriate for
your SBC. Refer to the explanations below for specific instructions about entering
correct information.
_______________________________________________________________________
PCI/P
LUG AND
P
LAY SETUP
O
PTIONS
The descriptions for the system options listed below show the values as they appear if
you have not yet run PCI/Plug and Play Setup. Once values have been defined, they
display each time Power Management Setup is run.
AMIBIOS SETUP - PCI / PLUG AND PLAY SETUP
(C)1998 American Megatrends, Inc. All Rights Reserved
On Board LAN Enabled
On Board Video Enabled
On Board SCSI Enabled
Plug and Play Aware O/S No
PCI Latency Timer (PCI Clocks) 64
PCI VGA Palette Snoop Disabled
PCI IDE BusMaster Disabled
OffBoard PCI IDE Card Auto
OffBoard PCI IDE Primary IRQ Disabled
OffBoard PCI IDE Secondary IRQ Disabled
DMA Channel 0 PnP
DMA Channel 1 PnP
DMA Channel 3 PnP
DMA Channel 5 PnP
DMA Channel 6 PnP
DMA Channel 7 PnP
IRQ5 PCI/PnP
IRQ9 PCI/PnP
IRQ10 PCI/PnP
IRQ11 PCI/PnP
IRQ15 PCI/PnP
Reserved Memory Size Disabled
Reserved Memory Address C8000
Available Options:
Disabled
Enabled
ESC:Exit
↑↓:Sel
PgUp/PgDn:Modify
F2/F3:Color