Filter
Top Products
CBI/CGI Technical Reference
Chassis Plans C-13
Reset SCSI Bus at IC Initialization
The default for this option is Enabled. When the Plug and Play Scam Support option
is set to Enabled, you cannot change this option to Disabled.
Available options are:
Enabled
Disabled
Host Adapter BIOS
This option enables or disables the AIC-7880 BIOS. The BIOS must be enabled if you
want the computer to boot from a SCSI hard disk drive connected to the adapter. In
addition, the BIOS must be enabled if you want to enable any of the following options:
• Support Removable Disks Under BIOS as Fixed Disks
• Extended BIOS Translation for DOS Drives > 1 GByte
• Multiple LUN Support
• BIOS Support for Bootable CD-ROM
• BIOS Support for Int 13 Extensions
• Support for Ultra SCSI Speed
• Send Start Unit SCSI Command
If the devices on the SCSI bus are controlled by device drivers (and therefore do not need
a BIOS), you can disable the AIC-7880 BIOS to free about 16KB of memory. This also
shortens the boot time by up to 60 seconds.
Available options are:
Enabled
Disabled
Support Removable Disks Under BIOS as Fixed Disks
This setting controls which removable-media drives are supported by the AIC-7880
BIOS.
When you attempt to change the setting of this option, the following informational
message displays:
WARNING: Do not remove media from a removable media drive if
it is under BIOS control.