Filter
Top Products
CBI/CGI Technical Reference
Chassis Plans C-7
BOOT DEVICE
O
PTIONS
The Boot Device Configuration screen displays the current settings for the boot device
and allows you to change these settings.
When you select Boot Device Options from the Configure/View Host Adapter Settings
screen, a screen similar to the following displays:
Boot Device Configuration Screen
The Boot Device options (Boot Target ID and Boot LUN Number) let you specify the
boot device. The default boot device is the device at SCSI ID 0 and logical unit number
(LUN) 0.
Boot Target ID
This option allows you to specify a different boot device by selecting a different SCSI
ID.
Available options are:
8-bit Adapters:
0 through 7
16-bit Adapters:
0 through 15
Boot LUN Number
If the boot device has multiple logical units, you must also specify the boot LUN.
Available options are:
0 through 7
Adaptec AIC7880 Ultra/Ultra W < SCSISelect(TM) > Utility vX.XX
Run SCSI Disk Utilities to get devices in your system.
Boot Target ID.......................................... 0
__
Options Below Have NO EFFECT if Multiple LUN Support is Disabled
__
Boot LUN Number......................................... 0
Advanced Configuration Options.......... Press <Enter>
<F6> - Reset to Host Adapter Defaults
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
(*=default)
AIC-7880 Ultra/Ultra W at Bus:Device XX:XXh
Boot Device Configuration