Filter
Top Products
CBI/CGI Technical Reference
Chassis PlansC-16
SCSI DISK
U
TILITIES
The SCSI Disk Utilities screen allows you to format or verify a device on the SCSI bus.
When you select SCSI Disk Utilities from the Options Menu, SCSISelect scans the SCSI
bus for SCSI devices and displays a screen similar to the following:
SCSI Disk Utilities Screen
This screen lists the SCSI IDs on the SCSI bus and the types of devices assigned to
each ID. If your system has an Ultra Wide SCSI adapter, 16 devices display (IDs
0 through 15). If you have an 8-bit adapter, only IDs 0 through 7 display.
Select the device you wish to format or verify and press <Enter>. If the device has
multiple logical units, a menu of LUNs displays. Select the LUN of the unit you want to
format or verify and press <Enter>.
The following menu displays:
Format Disk
A disk must have a low-level format before you can use the operating system's parti-
tioning and high-level formatting utilities, such as MS-DOS fdisk and format. Most
Adaptec AIC7880 Ultra/Ultra W < SCSISelect(TM) > Utility vX.XX
SCSI ID # 0: SEAGATE ST34371W
SCSI ID # 1: No device
SCSI ID # 2: No device
SCSI ID # 3: No device
SCSI ID # 4: No device
SCSI ID # 5: No device
SCSI ID # 6: No device
SCSI ID # 7: AIC-7880 Ultra/Ultra W
SCSI ID # 8: No device
SCSI ID # 9: No device
SCSI ID #10: No device
SCSI ID #11: No device
SCSI ID #12: No device
SCSI ID #13: No device
SCSI ID #14: No device
SCSI ID #15: No device
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
(*=default)
Format Disk
Verify Disk Media
AIC-7880 Ultra/Ultra W at Bus:Device XX:XXh
Select SCSI Disk and press <Enter>