Filter
Top Products
Peripheral SetupCBI/CGI Technical Reference
Chassis Plans 8-5
OnBoard IDE
This option specifies the on-board integrated drive electronics (IDE) controller
channel(s) to be used.
The Setup screen displays the system option:
OnBoard IDE Both
Available options are:
Both
Disabled
Primary
Secondary
_______________________________________________________________________
NOTE: If this option is set to Secondary or Both, the system assigns interrupt
request 15 (IRQ15).
_______________________________________________________________________
Saving and Exiting
When you have made all desired changes to Peripheral Setup, press <Esc> to return to
the AMIBIOS Setup Main Menu screen.
You may make changes to other Setup options before exiting from AMIBIOS Setup.
You may save the changes you have just made or you may exit from Setup without
saving your changes.