Filter
Top Products
Intel® Server RAID Controller U3-1 User’s Manual Rev 1.0 1-13
Quick Start Instructions
14. See Chapter 4, Section 4.3, “Configuring RAID Volumes Using the Intel® Integrated RAID
Storage Console” on page 4-12 to customize your RAID volumes using Storage Console.
1.4.4 Setup and Installation for UnixWare* 7.1
1.4.4.1 Software Requirements
• SRCU31 CD-ROM
• Hard disk space: minimum 20 MB
• SRCU31 UnixWare Installation Disk (HBA diskette) (one blank high density floppy diskette
required)
• SCO UnixWare 7.1 software with Netscape 4.08 or greater†
†
Not supplied
1.4.4.2 Installing UnixWare on a RAID Volume on a Stand Alone Server
Follow the required procedure below to install Intel Integrated RAID.
Note: When installing UnixWare, create only one RAID volume on which the operating system is to be
installed.
1. Create a SRCU31 UnixWare installation disk (HBA diskette): Insert the Intel Integrated RAID
CD-ROM into the target system and restart the system to boot from the CD-ROM. When the
ROM-DOS Startup Menu appears select option #1, Make Diskettes. When the Select a diskette
to create screen appears, select UnixWare Installation. A command window then appears.
Insert a blank high-density diskette in drive A: and press Enter to create the UnixWare
Installation Disk. Alternatively the CD-ROM can be inserted into a different system running
Windows* 95, 98 or NT. The CD-ROM’s auto-run feature will bring up a menu that will
allow creation of the UnixWare Installation Disk. If more than one RAID volume is required,
complete this installation and then use Storage Console to create multiple volumes.
2. Insert SRCU31 UnixWare installation disk 1 (of 2 disks) and reboot. Install the OS using the
install instruction provided in UnixWare 7 Installation Guide manual. UnixWare will prompt
you to install Host Bus Adapter diskette. At that time insert the UnixWare Installation diskette
created in step 1.
Warning: Only use the version of the SRCU31 UnixWare installation disk (HBA disk) that is provided on the
CD or available from the Intel Web site for installation of this adapter. Do not use a HBA disk
available from the vendor to install this product.
Note: During the installation of UnixWare, you will be prompted to install the Network Information
Services (NIS) package.
When prompted defer the installation of NIS by pressing F8 on the NIS configuration screen.
If you decide at a later time to install NIS, you can do so using the pkgadd(1) command.
3. Install the Netscape browser. The Netscape browser is provided in the SCO UnixWare CD-
ROM Disk 2 of 3.
4. After completing the UnixWare installation insert the Intel Server RAID Controller U3-1 CD-
ROM in the CD-ROM drive and mount the CD-ROM.