Filter
Top Products
Intel® Server RAID Controller U3-1 User’s Manual Rev 1.0 2-31
Advanced Installation Steps
2.5.3 Overview of Setup and Installation for Remote
Administration for NT Server
This chapter describes the installation procedures for SRCU31. These procedures include hardware
installation, the creation and configuration of a RAID volume, OS installation and the installation
of the SRCU31 software on servers requiring the ability to be remotely managed. Figure 2-23
illustrates the typical uses for this product.
Figure 2-22. Remote Administration for NT Server
Figure 2-23. Installing the Operating System on an SRCU31 RAID Volume, a Pass-through
Disk/IDE or Installing SRCU31 into a System with an Existing Operating System
A
B
A
B
C
C
D
D
Remote Servers
Workstation Remotely Administering NT Servers
Gather Required
Software and
Hardware
Install
Adapter Card
Create Bootable
RAID Volume
Using RCU
Install OS on a RAID
Volume
Run
SRCU31
Setup
Begin
Installation of
OS on a
SRCU31
Volume
Gather Required
Software and
Hardware
Install
Adapter Card
Create Pass-Thru
Disk and Select it
as Boot Volume
Using RCU
Install OS on a
Pass-Thru or
other Storage
Device
Run
SRCU31
Setup
Begin
Installation of
OS on a
Pass-Thru or
other Storage
Device
Gather Required
Hardware
and
Software
Install
Adapter Card
Back Up
Server
Update the OS
Run
SRCU31
Setup
Begin
Installation of
SRCU31
into a System
with an
Existing OS
Create OS
Installation
Driver Diskette
Create OS
Installation
Driver Diskette