Filter
Top Products
2-68 Intel® Server RAID Controller U3-1 User’s Manual Rev 1.0
Advanced Installation Steps
Packages which have been previously installed will only be updated if the revision
number of the currently installed package is older or newer.
11. After completing the installation of the components launch the application using the
commands in Table 2-6.
12. Reboot the system and create a RAID volume. See Section 2.2, RAID Configuration Utility.
13. Reboot the system into UnixWare and install the browser if necessary. The Netscape browser
is provided in the SCO UnixWare CD-ROM Disk 2 of 3.
14. After completing the installation of the components launch the application using the
commands in Table 2-6.
Launching Storage Console
1. Log on to the server as root or equivalent. Launch Netscape, type http://localhost:360/ and hit
Enter.
2. Click on the IOP # card that you want to configure; for example, IOP0, IOP1 etc.
3. Click on the RAID Storage Console link. The Storage Console appears.