Filter
Top Products
Chapter 1 — Using the CK30 Handheld Computer
24 CK30 Handheld Computer User’s Manual
To attach a tethered scanner
1 Locate and remove the scanner port cover.
Scanner
port cover
2 Insert the scanner 10-pin connector until it locks in place.
To scanner
Scanner port
3 Configure the Scanner Model command and select the
tethered device connected to the CK30. There are several
ways to configure the scanner model:
• Use the Configuration Utility. From the System Main
Menu, choose Configuration Utility > Scanners,
Symbologies > CK30 Tethered Scanner > Scanner
Model.
• Use one of the configuration methods discussed in “How
to Configure the CK30 Parameters” on page 28.
4 Modify any scanner commands necessary to meet your needs.
Use the Configuration Utility or one of the configuration
methods discussed on page 28.