Filter
Top Products
Chapter 2 — Configuring the CK30
CK30 Handheld Computer User’s Manual 33
Restoring Default Settings
You can restore the CK30 to factory default settings from the
Configuration Utility. For a complete list of the default settings,
see “Default Configuration” on page 114.
Note: Using the Restore Defaults option resets all network
parameters. As a result, you may lose network communications.
This option should only be used by network administrators or
by Intermec support personnel.
To restore factory default settings
1 From the Configuration Utility menu, select Restore
Defaults. The following Restore Defaults dialog box appears:
2 Press Enter to restore factory defaults.
Your CK30 performs a cold boot and returns all of your
settings to the factory default settings. When the CK30 is
done booting, the Start Screen appears.
Note: You may need to reinstall some applications after
restoring the default settings because any settings that were
modified for your application will be reset.
Exiting the Configuration Utility
You can exit the Configuration Utility at any time by pressing
the Esc key.
To exit the Configuration Utility
1 Press Esc until you return to the System Main Menu. If you
have made any changes to your configuration, the Save
Settings dialog appears: