Filter
Top Products
Chapter 2 — Configuring the CK30
48 CK30 Handheld Computer User’s Manual
Configuring Security
The CK30 provides three types of Wireless Local Area Network
(WLAN) security:
• WiFi Protected Access (WPA)
• 802.1x
• WEP
Use the next sections to understand how to configure each type
of security on your wireless CK30. If you choose not to use
security, see “Disabling Security” on page 54 for help.
If you are using 802.1x security, this section also assumes that
your authentication server and access points are properly
configured.
Loading Certificates
If you choose to use transport layer security (TLS) with WPA or
802.1x security, you need to have a unique client certificate on
the CK30 and a trusted root certificate authority (CA)
certificate. If you choose to use PEAP, you need to load a root
CA certificate. You can use a third-party CA to issue unique
client certificates and a root certificate. If your CA is on your
WLAN, you can use the CK30 Enroll application to obtain the
certificates.
To load certificates on the CK30
1 Configure the network and radio settings for the CK30.
2 From the System Main Menu, choose Programs >
Command Prompt.
3 Type
enroll –s
server_name
where server_name is the name or IP address of the CA server