Filter
Top Products
Chapter 3 — Developing and Installing Applications
66 CK30 Handheld Computer User’s Manual
Installing Applications Using Wavelink Avalanche
You can use the Wavelink Avalanche™ device management
system to install applications on all of your wireless CK30s. The
CK30 ships with the Avalanche Enabler already loaded on it.
Each time the Avalanche Enabler is activated (typically on a
warm boot), the CK30 attempts to connect to the Avalanche
Agent. When the CK30 connects to the agent, the Agent
determines whether an update is available and immediately starts
the software upgrade, file transfer, or configuration update.
To use Avalanche to remotely manage the CK30
1 Install software packages and updates for the CK30 using the
Avalanche Administrative Console.
2 Schedule the CK30 updates or manually initiate an update
using the Avalanche Administrative Console.
For more information on using Wavelink Avalanche, contact
your local Intermec representative or visit the Wavelink web site
at www.wavelink.com.
Launching Your Application Automatically
To launch your application automatically on the CK30 every
time you perform a warm or cold boot, make sure your CAB file
places a shortcut to your application in the \Windows\StartUp
folder.
Customizing How Applications Load on the CK30
If you have several processes that you need to have run in a
specific order as the CK30 turns on, you can use the AutoRun
system to customize the way applications load. For compatibility
with other Intermec computers, you can place a copy of
AutoRun.exe in the same folder as your AutoRun.dat file but it
is not required.
To create and install the AutoRun.dat file on your CK30
1 On the CK30, create a subfolder called 2577 on the
SDMMC Disk or the CK_FFS folder.