Filter
Top Products
125
Chapter 9
Web Interface
WinRoute contains a special Web server that can be used for several purposes, such
as an interface for user authentication and setting of certain user account parameters.
This Web server is available over SSL or using standard HTTP with no encryption (both
versions include identical pages).
Use the following URL (’server’ refers to the name or IP of the WinRoute host, 4080
represents a standard HTTP interface port) to open the unsecured version of the web
interface.
https://server:4081/
To use the encrypted version specify the HTTPS protocol and number of the port of the
encrypted Web interface (default is 4081) — e.g.
https://server:4081/
Note: This chapter addresses settings of web interface parameters and user preferences
(available to all users). Statistics viewed in the web interface (available only to users
possessing appropriate rights) are addressed in chapter
19.
9.1 Web Interface Parameters Configuration
To define basic WinRoute Web interface parameters go to the Web Interface folder in
Configuration → Advanced Options.
Note: The top part of the Web Interface → SSL-VPN tab is used for Kerio SSL-VPN settings.
For detailed information on this component, see chapter 22.
Enable Kerio SSL-VPN server
This option enables/disables the Kerio Clientless SSL-VPN interface. For details,
refer to chapter 22.
Enable Web Interface (HTTP)
Use this option to open the unsecured version (HTTP) of the Web interface The
default port for this unsecured interface is 4080.
Note: The main disadvantage of usage of the unsecured web interface is that the
network traffic may be tapped and user login data might be misused. Therefore,
the secured web interface shall be always preferred.