Filter
Top Products
2.2 Conflicting software
13
Clientless SSL-VPN
The role of the VPN solution which requires a special application at the client
side can be supplied by remote access to a private network using a web browser.
Clientless SSL-VPN enables browsing through hosts and shared items in remote net-
works as well as files downloads and saving. The traffic is secured by SSL (HTTPS).
2.2 Conflicting software
The WinRoute host can be used as a workstation, however it is not recommended as user
activity can affect the functionality of the operating system and WinRoute in a negative
way.
WinRoute can be run with most of common applications. However, there are certain
applications that should not be run at the same host as WinRoute for this could result in
collisions.
Collision of low-level drivers
WinRoute Firewall may collide with applications that use low-level drivers with ei-
ther identical or similar technology.
• Applications used for Internet connection, such as Microsoft Proxy Server and
Microsoft Proxy Client, etc.
• Network firewalls — i.e. Microsoft ISA Server, CheckPoint Firewall-1, WinProxy
(by Ositis), Sygate Office Network and Sygate Home Network, etc.
• Personal firewalls, such as Kerio Personal Firewall, Zone Alarm, Sygate Personal
Firewall, Norton Personal Firewall, etc.
• Software designed to create virtual private networks (VPN) — i.e. software ap-
plications developed by the following companies: CheckPoint, Cisco Systems,
Nortel, etc. There are many such applications and their features vary from ven-
dor to vendor.
Under proper circumstances, use of the VPN solution included in WinRoute is
recommended (for details see chapter
21). Otherwise, we recommend you to test
a particular VPN server or VPN client with WinRoute trial version or to contact
our technical support (see chapter 25).
Note: VPN implementation included in Windows operating system (based on the
PPTP protocol) is supported by WinRoute.
Port collision
Applications that use the same ports as the firewall cannot be run at the WinRoute
host (or the configuration of the ports must be modified).
If all services are running, WinRoute uses the following ports:
• 53/UDP — DNS Forwarder
• 67/UDP — DHCP server