Filter
Top Products
4.3 Registration of the product in the Administration Console
43
5. The last page provides the information summary. If any information is incorrect,
use the Back button to browse to a corresponding page and correct the data.
Figure 4.12 Product registration — summary
Click on Finish to use the information to generate a unique license key. The new
license is applied immediately (restart is not required).
Note: If an error is reported upon finishing of the registration process (e.g. failure
of network connection, etc.), simply restart the wizard and repeat the registration.
Update of registration information
If WinRoute is already registered, the Update registration info link is displayed at the Ad-
ministration Console’s welcome page. Click on the link to run the registration wizard (as
described above) with the information preset as defined within the previous registration
process. The same method as the for the primary registration can be used to add license
numbers and/or to update user information.