Filter
Top Products
9.1 Web Interface Parameters Configuration
127
Advanced parameters for the Web interface can be set upon clicking on the Advanced
button.
Configuration of ports of the Web Interface
Use the TCP ports section to set ports for unencrypted and encrypted versions of the
Web interface (default ports are 4080 for the unencrypted and 4081 for the encrypted
version of the Web interface).
Figure 9.2 Configuration of ports in WinRoute’s Web Interface
HINT: If no WWW server is running on the WinRoute host, standard port (i.e. 80) for
HTTP can be used for the unencrypted Web interface. In such a case, the port number is
not necessarily required in URLs for pages of the unencrypted Web interfaces.
Warning: If any of the entries are specified by a port which is already used by another
service or application, and the Apply button (in Configuration → Advanced Options) is
clicked, WinRoute will accept this port, however, the Web interface will not run at the port
and an error in the following format will be reported in the Error log (see chapter 20.8):
Socket error: Unable to bind socket for service to port 80.
(5002) Failed to start service "WebInterface"
bound to address 192.168.1.10.
If you are not sure that specified ports are free, check the Error log immediately after
clicking Apply to find out whether the corresponding error has been logged.