Kyocera C8026N Printer User Manual


 
C.1 Printer Specification
C-2
C.1 Printer Specification
Item Specification
Printing method Electro photographic (Advanced Beam Array) single-pass
4-color tandem drum system
Printing speed See C.2 Printing Speeds on page C-4
Resolution 600 dpi (horizontal and vertical)
First print (A4, 23ºC) Approximately 9 seconds (priority mode)
Warm up time (23ºC) 179 seconds or less
Main Controller CPU PowerPC 750CXe (600 MHz)
Main Memory 128 MB, expandable up to 512 MB maximum
Expansion Memory Module 64, 128, 256 MB (for 2 slots)
Operating System Windows 95/98/Me, Windows NT/2000/XP, Macintosh,
Linux
Protocol Support IPX/SPX, TCP/IP, EtherTalk, NetBEUI
Interfaces Parallel IEEE1284, 1
Network 10Base-T/100Base-TX, 1
Optional Network Interface Card,
Serial Interface Board, 1
Hard Disk, 1
Memory Card Slot Compact flash memory card, maximum 256 MB
Self-diagnostics Performed at power-on
Maximum Duty Cycle (for standard dry A4
plain paper)
100,000 pages per month
Imaging Drum Amorphous silicon drum
Developers Dual-component dry developers
Main Charger Positive scorotron charger
Transfer Belt and Roller
Separation Small ratio curvature separation
Drum Cleaning Counter blade
Drum Discharging LED array
Fuser Heat rollers
Paper See 2.1.2 Paper specifications on page 2-2.
Paper Sizes Cassettes A3, B4, A4, B5, A5, Ledger, Legal, Letter
Multi-purpose Tray 80 148mm to 310 458 mm
Unprintable Area 4 mm margin top, bottom, left, right
Paper Capacity Cassettes 500 sheets (80 g/m²)
Multi-purpose Tray: 150 sheets (75 g/m²)/30 sheets (160 g/m² or more)
Output Tray Capacity 500 sheets (80 g/m²)
Table C-1